Create 1/4" to 2" reveals in stucco and plaster surfaces
Clips are provided for alignment and as a base for sealants.
Create 1/4" to 4" reveals in stucco and plaster surfaces. Clips are provided for alignment and as a base for sealants. Factory fabricated intersections of crosses, T's, L's, inside and outside corners, and end closures of channel reveals are available to form clear channels.
Optional protective reveal caps available. Contact your sales rep at [email protected] if interested regarding cost and lead time.
Product Data & Ordering Information
| Product code | Ground (A) | Reveal (B) | Overall Width (C) | Pcs./Box |
|---|---|---|---|---|
| CS25-50 | 1/4" | 1/2" | 2-1/8" | 50 |
| CS38-50 | 3/8" | 35 | ||
| CS50-50 | 1/2" | 35 | ||
| CS58-50 | 5/8" | 25 | ||
| CS75-50 | 3/4" | 25 | ||
| CS78-50 | 7/8" | 25 | ||
| CS100-50 | 1" | 20 | ||
| CS25-75 | 1/4" | 3/4" | 3-1/8" | 50 |
| CS38-75 | 3/8" | 35 | ||
| CS50-75 | 1/2" | 35 | ||
| CS58-75 | 5/8" | 25 | ||
| CS75-75 | 3/4" | 25 | ||
| CS78-75 | 7/8" | 18 | ||
| CS100-75 | 1" | 15 | ||
| CS25-100 | 1/4" | 1" | 3-1/8" | 50 |
| CS38-100 | 3/8" | 25 | ||
| CS50-100 | 1/2" | 25 | ||
| CS58-100 | 5/8" | 25 | ||
| CS75-100 | 3/4" | 25 | ||
| CS78-100 | 7/8" | 18 | ||
| CS100-100 | 1" | 15 | ||
| CS25-150 | 1/4" | 1-1/2" | 3-1/8" | 50 |
| CS38-150 | 3/8" | 20 | ||
| CS50-150 | 1/2" | 20 | ||
| CS58-150 | 5/8" | 20 | ||
| CS75-150 | 3/4" | 20 | ||
| CS78-150 | 7/8" | 17 | ||
| CS100-150 | 1" | 12 | ||
| CS25-200 | 1/4" | 2" | 4" | 40 |
| CS38-200 | 3/8" | 20 | ||
| CS50-200 | 1/2" | 15 | ||
| CS58-200 | 5/8" | 14 | ||
| CS75-200 | 3/4" | 14 | ||
| CS78-200 | 7/8" | 12 | ||
| CS100-200 | 1" | 12 | ||
| CS25-250 | 1/4" | 2-1/2" | 5" | 15 |
| CS50-250 | 1/2" | 15 | ||
| CS58-250 | 5/8" | 15 | ||
| CS75-250 | 3/4" | 15 | ||
| CS78-250 | 7/8" | 15 | ||
| CS100-250 | 1" | 15 | ||
| CS25-300 | 1/4" | 3" | 5" | 15 |
| CS50-300 | 1/2" | 15 | ||
| CS58-300 | 5/8" | 15 | ||
| CS75-300 | 3/4" | 15 | ||
| CS78-300 | 7/8" | 13 | ||
| CS100-300 | 1" | 10 | ||
| CS25-400 | 1/4" | 4" | 6" | 15 |
| CS50-400 | 1/2" | 15 | ||
| CS58-400 | 5/8" | 15 | ||
| CS75-400 | 3/4" | 14 | ||
| CS78-400 | 7/8" | 12 | ||
| CS100-400 | 1" | 10 |
Notes:
- All profiles are provided in 10'-0" lengths.
- All with removable caps (except 1/4" and 3/8" grounds) and 2-1/2", 3" and 4" reveals. All with connector clips (except 1/4" grounds).
Code Approvals & Performance Standards
- ASTM C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- ASTM C1861 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- ASTM D1784 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
- SDS Vinyl Corp PVC Compounds
STORAGE
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet
| Product Code | Description |
|---|---|
| CSXX-50 | 1/2" Channel Reveal with perforated flanges |
| CSXX-75 | 3/4" Channel Reveal with perforated flanges |
| CSXX-100 | 1" Channel Reveal with perforated flanges |
| CSXX-150 | 1-1/2" Channel Reveal with perforated flanges |
| CSXX-200 | 2" Channel Reveal with perforated flanges |
| CSXX-250 | 2-1/2" Channel Reveal with perforated flanges |
| CSXX-300 | 3" Channel Reveal with perforated flanges |
| CSXX-400 | 4" Channel Reveal with perforated flanges |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.